When using the Motion Platform V3 and another product/application that also uses UDP data, you will need to forward the data from the Platform manager to the new device's software. This will vary depending on the software you're wanting to connect it to however below is an example of this with the SF-1000 Thrustmaster steering wheel.
1. In the Platform manager software select the game profile you're wanting to play (For this example it will be F1 22)
2. Choose Edit inside the profile and select Configure then go to UDP Proxy/Forwarder
3. Once in this new window, click on Add and change the IP and port to what is on the secondary device/software you're using. For example, ours looks like the below.
4. To get the correct IP and Port for your SF-1000 you will need to view the Thrustmaster Instructions on how this can be done. A link to these instructions can be seen here
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article