1. Open the Platform Manager Software
2. Scroll down to the bottom of the profiles list and select New Profile
3. Set a name for it such as Direct Input Profile. This will then create a new profile at the top of your list.
4. Locate the new profile and select Edit inside it.
5. Once this new window appears, select Configure at the top right.
6. In the Game Controllers drop down, select the controller that you have connected to your setup. This can be a console controller or wheel and pedals; it is up to you (In this situation we are just using a controller). Select Run Mapping Wizard at the bottom once you have chosen your controller.
7. A new window will then appear. If all looks correct at the top; select next to continue with the mapping procedure and follow the steps that appears.
8. Once all the mapping has been assigned, it will then load all of the movements you've created into the Mapping tab as seen in Step 5. Select Save & Close at the bottom of the window.
9. Once this is done you should now be ready to go with moving your Motion Platform with the controller that you've set it up for. Just make sure that you have the Direct Input profile activated for this to be used.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article